电容屏被广泛使用,多点触摸机制也随之发展,可惜29内核不支持多点上报,30以后内核才支持。
特此记录移植过程。
1、修改include/linux/input.h
#define SYN_REPORT 0
#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
/*
* Keys and buttons
@@ -644,6 +645,18 @@
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
+
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
@@ -742,6 +755,12 @@
#define BUS_ATARI 0x1B
/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+
+/*
* Values describing the status of a force-feedback effect
*/
#define FF_STATUS_STOPPED 0x00
@@ -1310,6 +1329,11 @@
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
+static inline void input_mt_sync(struct input_dev *dev)
+{
+ input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
2、修改drivers/input/input.c
#define INPUT_DEVICES 256
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+ ABS_MT_TOUCH_MAJOR,
+ ABS_MT_TOUCH_MINOR,
+ ABS_MT_WIDTH_MAJOR,
+ ABS_MT_WIDTH_MINOR,
+ ABS_MT_ORIENTATION,
+ ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y,
+ ABS_MT_TOOL_TYPE,
+ ABS_MT_BLOB_ID,
+ ABS_MT_TRACKING_ID,
+ 0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
+
static LIST_HEAD(input_dev_list);
static LIST_HEAD(input_handler_list);
@@ -149,13 +168,17 @@
case SYN_CONFIG:
disposition = INPUT_PASS_TO_ALL;
break;
–
+
case SYN_REPORT:
if (!dev->sync) {
dev->sync = 1;
disposition = INPUT_PASS_TO_HANDLERS;
}
break;
+ case SYN_MT_REPORT:
+ dev->sync = 0;
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
}
break;
@@ -185,6 +208,11 @@
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX)) {
+ if (test_bit(code, input_abs_bypass)) {
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
+ }
+
value = input_defuzz_abs_event(value,
dev->abs[code], dev->absfuzz[code]);
@@ -1630,10 +1658,20 @@
.open = input_open_file,
};
+static void __init input_init_abs_bypass(void)
+{
+ const unsigned int *p;
+
+ for (p = input_abs_bypass_init_data; *p; p++)
+ input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
static int __init input_init(void)
{
int err;
+ input_init_abs_bypass();
+
err = class_register(&input_class);
if (err) {
printk(KERN_ERR “input: unable to register input_dev class/n”);
3、输入子系统的初始化
4、子系统上报
input_mt_sync(ts->input);
注: 转载请注明出处
今天的文章29内核输入子系统多点上报机制实现分享到此就结束了,感谢您的阅读。
版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 举报,一经查实,本站将立刻删除。
如需转载请保留出处:https://bianchenghao.cn/63705.html