一、简介
基于matlab心电信号ECG滤波处理
二、源代码
function varargout = ECG(varargin)
% ECG MATLAB code for ECG.fig
% ECG, by itself, creates a new ECG or raises the existing
% singleton*.
%
% H = ECG returns the handle to a new ECG or the handle to
% the existing singleton*.
%
% ECG('CALLBACK',hObject,eventData,handles,...) calls the local
% function named CALLBACK in ECG.M with the given input arguments.
%
% ECG('Property','Value',...) creates a new ECG or raises the
% existing singleton*. Starting from the left, property value pairs are
% applied to the GUI before ECG_OpeningFcn gets called. An
% unrecognized property name or invalid value makes property application
% stop. All inputs are passed to ECG_OpeningFcn via varargin.
%
% *See GUI Options on GUIDE's Tools menu. Choose "GUI allows only one % instance to run (singleton)".
%
% See also: GUIDE, GUIDATA, GUIHANDLES
% Edit the above text to modify the response to help ECG
% Last Modified by GUIDE v2.5 22-May-2020 21:35:12
% Begin initialization code - DO NOT EDIT
gui_Singleton = 1;
gui_State = struct('gui_Name', mfilename, ...
'gui_Singleton', gui_Singleton, ...
'gui_OpeningFcn', @ECG_OpeningFcn, ...
'gui_OutputFcn', @ECG_OutputFcn, ...
'gui_LayoutFcn', [] , ...
'gui_Callback', []);
if nargin && ischar(varargin{1})
gui_State.gui_Callback = str2func(varargin{1});
end
if nargout
[varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
else
gui_mainfcn(gui_State, varargin{:});
end
% End initialization code - DO NOT EDIT
% --- Executes just before ECG is made visible.
function ECG_OpeningFcn(hObject, eventdata, handles, varargin)
% This function has no output args, see OutputFcn.
% hObject handle to figure
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
% varargin command line arguments to ECG (see VARARGIN)
% Choose default command line output for ECG
handles.output = hObject;
% Update handles structure
guidata(hObject, handles);
% UIWAIT makes ECG wait for user response (see UIRESUME)
% uiwait(handles.figure1);
% --- Outputs from this function are returned to the command line.
function varargout = ECG_OutputFcn(hObject, eventdata, handles)
% varargout cell array for returning output args (see VARARGOUT);
% hObject handle to figure
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
% Get default command line output from handles structure
varargout{1} = handles.output;
function edit1_Callback(hObject, eventdata, handles)
% hObject handle to edit1 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
% Hints: get(hObject,'String') returns contents of edit1 as text
% str2double(get(hObject,'String')) returns contents of edit1 as a double
% --- Executes during object creation, after setting all properties.
function edit1_CreateFcn(hObject, eventdata, handles)
% hObject handle to edit1 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles empty - handles not created until after all CreateFcns called
% Hint: edit controls usually have a white background on Windows.
% See ISPC and COMPUTER.
if ispc && isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor'))
set(hObject,'BackgroundColor','white');
end
% --- Executes on button press in pushbutton1.
function pushbutton1_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton1 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
[FileName PathName]=uigetfile('*.mat','MAT-files(*.mat)','选择文件');
str=[PathName FileName];
set(handles.edit1,'string',str);
Fs=200;N=512;MEAN=0;MIN=0;MAX=0;VAR=0;STD=0;RR=0;
global im;global MEAN;global MIN;global MAX;global VAR;global STD;global RR;
if strcmp(str,'D:\心电数据\被试2 心电\chenwei1.mat')==1
im=1;
else
im=2;
end
qq=get(handles.popupmenu1,'value')
bb=get(handles.popupmenu2,'value')
switch(im)
case 1
load('chenwei1.mat');
ECG=xin(qq,:);
case 2
load('fanglipeng1.mat');
ECG=xin(qq,:);
end
% uu1=get(handles.radiobutton7,'value');
% uu2=get(handles.radiobutton8,'value');
% uu3=get(handles.radiobutton8,'value');
% if uu1==1
% MAX=max(EGC);
% set(handles.edit3,'string',MAX);
% end
% if uu1==2
% MIN=min(EGC);
% set(handles.edit4,'string',MIN);
% end
% if uu1==3
% MEAN=mean(EGC);
% set(handles.edit5,'string',MEAN);
% end
if bb==1
disp([num2str(bb)]);
t=1/50:1/50:length(ECG)/50;
MEAN=mean(xin(qq,:));MAX=max(xin(qq,:)); MIN=min(xin(qq,:));
VAR=var(xin(qq,:),0,2);STD=std(xin(qq,:),0,2);
axes(handles.axes3);
grid on;plot(t,ECG);
xlabel('时间（s）');ylabel('幅值(V)');
title('原始心电信号时域显示');
N=512;
y=fft(ECG,N);
mag=abs(y);
f=(0:length(y)-1)*Fs/length(y);
axes(handles.axes5);
plot(f,mag)
xlim([0,100]);
title('原始心电信号频谱图')
xlabel('频率（Hz）');ylabel('幅值');
axes(handles.axes8);
histogram(ECG);xlabel('信号幅值');ylabel('个数');
title('不同区间心电信号的分布');
elseif bb==2
disp([num2str(bb)]);
%-----------------------------心电信号高通滤波器进行基线漂移纠正--------------------------------%
%还可采用椭圆滤波器或中值法（myMedfilt）等进行基线漂移纠正。
fp=1.4;fr=0.05;rp=1;rs=30;
wp=fp/(Fs/2);wr=fr/(Fs/2);
[n,wn]=buttord(wp,wr,rp,rs);
[b,a]=butter(n,wn,'high');
[hw,w]=freqz(b,a);
y2=filter(b,a,ECG);
axes(handles.axes1);
grid on;
t1=0:1/50:(length(y2)-1)/50;
plot(t1,y2)
title('基线漂移去除时域')
xlabel('时间（s）');ylabel('幅值(V)');
y2=fft(y2,N);
mfb=abs(y2);
f=(0:length(y2)-1)*Fs/length(y2);
axes(handles.axes2);
grid on;
plot(f,mfb);
xlim([0,100]);
title('基线纠正后信号幅频')
xlabel('频率（Hz）');ylabel('幅值');
elseif bb==3
disp([num2str(bb)]);
fp=60;fs=100; %通带截止频率， 阻带截止频率
rp=1.4;rs=1.6; %通带、阻带衰减
wp=2*pi*fp;ws=2*pi*fs;
[n,wn]=buttord(wp,ws,rp,rs,'s'); %’s’是确定巴特沃斯模拟滤波器阶次和3dB 截止模拟频率
[z,P,k]=buttap(n); %设计归一化巴特沃斯模拟低通滤波器，z为极点，p为零点和k为增益
[bp,ap]=zp2tf(z,P,k); %转换为Ha(p),bp为分子系数，ap为分母系数
[bs,as]=lp2lp(bp,ap,wp); %Ha(p)转换为低通Ha(s)并去归一化，bs为分子系数，as为分母系数
[hs,ws]=freqs(bs,as); %模拟滤波器的幅频响应
[bz,az]=bilinear(bs,as,Fs); %对模拟滤波器双线性变换
[h1,w1]=freqz(bz,az); %数字滤波器的幅频响应
m=filter(bz,az,ECG);
t1=0:1/50:(length(m)-1)/50;
axes(handles.axes1);
grid on;axis tight;
plot(t1,m)
title('低通滤波心电信号时域图');
xlabel('时间（s）');ylabel('幅值(V)');
y1=fft(m,N);
mfa=abs(y1);
f=(0:length(y1)-1)*Fs/length(y1);
axes(handles.axes2);
grid on;axis tight;
plot(f,mfa);
xlim([0,100]);
title('低通滤波心电信号频谱图');
xlabel('频率（Hz）');ylabel('幅值');
elseif bb==4
disp([num2str(bb)]);
%50Hz陷波器：由一个低通滤波器加上一个高通滤波器组成
%而高通滤波器由一个全通滤波器减去一个低通滤波器构成
Me=100; %滤波器阶数
L=100; %窗口长度
beta=100; %衰减系数
Fs=200;
wc1=49/Fs*pi; %wc1为高通滤波器截止频率，对应51Hz
wc2=50/Fs*pi ;%wc2为低通滤波器截止频率，对应49Hz
h=ideal_lp(0.132*pi,Me)-ideal_lp(wc1,Me)+ideal_lp(wc2,Me); %h为陷波器冲击响应
w=kaiser(L,beta);
y=h.*rot90(w); %y为50Hz陷波器冲击响应序列
y3=filter(y,1,ECG);
t1=0:1/50:(length(y3)-1)/50;
axes(handles.axes1);
grid on;axis tight;
plot(t1,y3)
title('去除工频干扰时域时域')
xlabel('时间（s）');ylabel('幅值(V)');
y3=fft(y3,N);
mfc=abs(y3);
f=(0:length(y3)-1)*Fs/length(y3);
axes(handles.axes2);
grid on;axis tight;
plot(f,mfc);
xlim([0,100]);
title('去除工频干扰时域频域');
xlabel('频率（Hz）');ylabel('幅值');
end
%%
%心率计算
%低通滤波
fp=60;fs=100; %通带截止频率，阻带截止频率
rp=1.4;rs=1.6; %通带、阻带衰减
wp=2*pi*fp;ws=2*pi*fs;
[n,wn]=buttord(wp,ws,rp,rs,'s'); %’s’是确定巴特沃斯模拟滤波器阶次和3dB 截止模拟频率
[z,P,k]=buttap(n); %设计归一化巴特沃斯模拟低通滤波器，z为极点，p为零点和k为增益
[bp,ap]=zp2tf(z,P,k); %转换为Ha(p),bp为分子系数，ap为分母系数
[bs,as]=lp2lp(bp,ap,wp); %Ha(p)转换为低通Ha(s)并去归一化，bs为分子系数，as为分母系数
[hs,ws]=freqs(bs,as); %模拟滤波器的幅频响应
[bz,az]=bilinear(bs,as,Fs); %对模拟滤波器双线性变换
[h1,w1]=freqz(bz,az); %数字滤波器的幅频响应
m=filter(bz,az,ECG);
fp=1.4;fr=0.05;rp=1;rs=30;
wp=fp/(fs/2);wr=fr/(fs/2);
[n,wn]=buttord(wp,wr,rp,rs);
[b,a]=butter(n,wn,'high');
[hw,w]=freqz(b,a);
y2=filter(b,a,m);
%高通滤波
fp=1.4;fr=0.05;rp=1;rs=30;
wp=fp/(Fs/2);wr=fr/(Fs/2);
[n,wn]=buttord(wp,wr,rp,rs);
[b,a]=butter(n,wn,'high');
[hw,w]=freqz(b,a);
y2=filter(b,a,m);
%带阻滤波
Me=100; %滤波器阶数
L=100; %窗口长度
beta=100; %衰减系数
wc1=49/Fs*pi; %wc1为高通滤波器截止频率，对应51Hz
wc2=50/Fs*pi ;%wc2为低通滤波器截止频率，对应49Hz
h=ideal_lp(0.132*pi,Me)-ideal_lp(wc1,Me)+ideal_lp(wc2,Me); %h为陷波器冲击响应
w=kaiser(L,beta);
y=h.*rot90(w); %y为50Hz陷波器冲击响应序列
y3=filter(y,1,y2);
%------------------------R波检测及心率计算---------------------------------
a=1;b=[-0.000563925539225382,-0.000687497480673608,-0.000400105459896818,1.40107308696153e-18,0.000167430218323421,-4.18540736387490e-19,-0.000215512204999462,-2.31378858508372e-19,0.000825087119402599,0.00173867121147225,0.00170041274003132,-2.89185229056478e-18,-0.00281247259984511,-0.00484192899664537,-0.00404159503274541,6.02125250728051e-18,0.00516947529617596,0.00792307431385663,0.00588976752279114,-7.41129393462523e-18,-0.00583817525454588,-0.00764316928687033,-0.00463943332803296,-9.61260744539564e-19,0.00196521978920439,-2.40802770032636e-18,-0.00240551785915901,4.71696771800100e-18,0.00853358817557591,0.0172851206658474,0.0162833499451329,-1.24036605494920e-17,-0.0253107164699268,-0.0426277900469897,-0.0350794664744733,1.73330580157676e-17,0.0449057473944898,0.0701489638765231,0.0540262508439817,-3.98392673063995e-17,-0.0616816640708770,-0.0915638898806427,-0.0672043113722621,-2.75356818775531e-17,0.0700978687033445,0.0996538686301192,0.0700978687033445,-2.75356818775531e-17,-0.0672043113722621,-0.0915638898806427,-0.0616816640708770,-3.98392673063995e-17,0.0540262508439817,0.0701489638765231,0.0449057473944898,1.73330580157676e-17,-0.0350794664744733,-0.0426277900469897,-0.0253107164699268,-1.24036605494920e-17,0.0162833499451329,0.0172851206658474,0.00853358817557591,4.71696771800100e-18,-0.00240551785915901,-2.40802770032636e-18,0.00196521978920439,-9.61260744539564e-19,-0.00463943332803296,-0.00764316928687033,-0.00583817525454588,-7.41129393462523e-18,0.00588976752279114,0.00792307431385663,0.00516947529617596,6.02125250728051e-18,-0.00404159503274541,-0.00484192899664537,-0.00281247259984511,-2.89185229056478e-18,0.00170041274003132,0.00173867121147225,0.000825087119402599,-2.31378858508372e-19,-0.000215512204999462,-4.18540736387490e-19,0.000167430218323421,1.40107308696153e-18,-0.000400105459896818,-0.000687497480673608,-0.000563925539225382];
d=filter(b,a,y3);
t=(0:(length(d)-1))/Fs;
d1=sort(d,'descend');d2=0;
for i=201 :2200
d2=d1(i)+d2;
end;
d3=d2/2000;
[R_V,R_L]=findpeaks(d(12001:24000),'minpeakdistance',1,'minpeakheight',d3);
d3=d2/2000;
[R_V,R_L]=findpeaks(d(12001:24000),'minpeakdistance',1,'minpeakheight',d3);
%根据位置和采样频率来计算采样区间内的平均心率
H_Rate = 60*(length(R_L)-1)/((R_L(length(R_L))-R_L(1))/200);
RR=num2str(H_Rate,3);
%算出采样的时间区间
%R_Time = R_L(length(R_L))/200;
% --- Executes on button press in radiobutton7.
function radiobutton7_Callback(hObject, eventdata, handles)
% hObject handle to radiobutton7 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
global MAX;
set(handles.edit3,'string',MAX);
% Hint: get(hObject,'Value') returns toggle state of radiobutton7
% --- Executes on button press in radiobutton8.
function radiobutton8_Callback(hObject, eventdata, handles)
% hObject handle to radiobutton8 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
global MIN;
set(handles.edit4,'string',MIN);
% Hint: get(hObject,'Value') returns toggle state of radiobutton8
% --- Executes on button press in radiobutton9.
function radiobutton9_Callback(hObject, eventdata, handles)
% hObject handle to radiobutton9 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
global MEAN;
set(handles.edit5,'string',MEAN);
% Hint: get(hObject,'Value') returns toggle state of radiobutton9
function edit3_Callback(hObject, eventdata, handles)
% hObject handle to edit3 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
% Hints: get(hObject,'String') returns contents of edit3 as text
% str2double(get(hObject,'String')) returns contents of edit3 as a double
% --- Executes during object creation, after setting all properties.
function edit3_CreateFcn(hObject, eventdata, handles)
% hObject handle to edit3 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles empty - handles not created until after all CreateFcns called
% Hint: edit controls usually have a white background on Windows.
% See ISPC and COMPUTER.
if ispc && isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor'))
set(hObject,'BackgroundColor','white');
end
三、运行结果
四、备注
版本：2014a
今天的文章【心电信号】基于matlab心电信号ECG滤波处理【含Matlab源码 1067期】分享到此就结束了，感谢您的阅读。
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。
如需转载请保留出处：https://bianchenghao.cn/17453.html
